Delta ASDA-A3 Series User Manual page 1235

Troubleshooting
ALE06 Fagor encoder - overspeed warning
14
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
ALE07 Fagor encoder - temperature warning
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
14-88
Condition: an error occurred to the Fagor encoder.
Cause:
The motor speed is too fast and has exceeded the maximum value of the
1.
encoder.
The installation or wiring of the encoder is incorrect.
2.
The installation and operating environment do not meet the specifications,
3.
causing encoder error.
The encoder is damaged.
4.
Make sure the encoder or read head is correctly installed and wired according
1.
to the manufacturer's instruction manual.
If the issue persists, contact the distributor of the encoder.
2.
DI.ARST
Condition: an error occurred to the Fagor encoder.
Cause:
The encoder temperature has exceeded the maximum value.
1.
The installation or wiring of the encoder is incorrect.
2.
The installation and operating environment do not meet the specifications,
3.
causing encoder error.
The encoder is damaged.
4.
Make sure the encoder or read head is correctly installed and wired according
1.
to the manufacturer's instruction manual.
If the issue persists, contact the distributor of the encoder.
2.
DI.ARST
ASDA-A3