Delta ASDA-A3 Series User Manual page 1283

Specifications
Note:
1. The rated torque is the continuous permissible torque between 0˚C and 40˚C (32˚F and 104˚F)
operating temperature which is suitable for the servo motor mounted with the heat sink of the following
A
dimensions.
F220: 650 mm x 650 mm x 35 mm
Material: aluminum
2. The built-in servo motor brake is only for keeping the object in a stopped state. Do not use it for
deceleration or as a dynamic brake.
If the operating temperature is over 40˚C (104°F), refer to Section A.3.3 Power derating curves of the
3.
B3 motors.
4. In the servo motor model name,
5. Follow the load specification for the motor shaft during operation. The load for the motor shaft is
defined as follows.
A-46
represents the encoder type.
ASDA-A3