Delta ASDA-A3 Series User Manual page 1204

ASDA-A3
AL209 Parameter number of Type [8] PR is out of range
Checking method
and corrective action
How to clear the
alarm?
AL211 Parameter format setting of Type [8] PR is in error
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
AL213 Parameter setting of Type [8] PR is in error
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
AL215 Parameter written by Type [8] PR is read-only
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
AL217 Parameter written by Type [8] PR is write-protected when Servo On
Trigger condition
and cause
Write parameter using PR procedure: when the data source is Parameter and the
parameter number setting exceeds the range, check the setting range of the
number for the written parameters.
DI.ARST
Condition: parameter format setting of Type [8] PR command is in error.
Cause:
Incorrect parameter format.
1.
The ASDA-Soft software version and the firmware version do not match.
2.
Check if the parameter format is correct.
1.
Check if you are using the latest version of the ASDA-Soft software.
2.
If you took the corrective actions but the issue persists, contact the local distributor
or technician.
DI.ARST
Condition: when you use Type [8] PR command to write the parameter,
the parameter value is incorrect.
Cause: an error occurs when you write the parameter with Type [8] PR command.
Make sure the parameter value is within the correct range.
DI.ARST
Condition: the read-only parameter is written by Type [8] PR command.
Cause: an error occurs when you write the parameter with Type [8] PR command.
The specified parameter is read-only.
DI.ARST
Condition: when you use Type [8] PR command to write the parameter, the
parameter is write-protected when the servo drive is On or the parameter value
exceeds the range.
Cause: an error occurs when you write the parameter with Type [8] PR command.
Troubleshooting
14
14-57