Delta ASDA-A3 Series User Manual page 1354

ASDA-A3
Release date
August, 2019
December, 2017
April, 2017
For relevant information about [ASDA-A3], please refer to:
(1) ASDA-A2 User Manual (issued in March, 2022)
Version Chapter
V3.0
(Third edition)
13.1
13.2
Appendix A
Appendix B
V2.0
(Second 8.2
edition)
3.1.4
3.9 & 3.10
9.1
V1.0
(First edition)
Revision contents
Modify the alarm description for AL503.
Add alarms AL050, AL054, AL05B, AL05C,
AL219, AL249, AL35F, AL3CF, AL3E2, and
AL3E3.
Delete alarms AL302 and AL303.
Modify the alarm descriptions for AL001, AL006,
AL014, AL015, AL018, AL024, AL034, AL035,
AL041, AL045, AL052, AL058, AL060, AL067,
AL06A, AL07E, AL086, AL235, AL283, AL284,
AL285, AL289, AL3F1, and AL503.
Add alarms AL050, AL054, AL05B, AL05C,
AL219, AL249, AL35F, AL3CF, AL3E2, and
AL3E3.
Delete alarms AL302 and AL303.
Modify the specifications of the ECM-A3 series
motors.
Add the DMCNET terminal resistor.
Add the power cable specification.
Add the power cable size.
Add the encoder connector.
Add the encoder cable specification.
Add the A2/A3 conversion cable part numbers.
Add the USB cable and USB isolator part
numbers.
Modify the tables of the optional accessories.
Change the parameter default values of P1.000,
P1.030, P2.031, and P2.047.
Change the parameter format of P2.031.
Add notes for the UVW connector illustration
(angle of viewing).
Add notes for the STO connector: STO
certification application in progress.
Correct the pin numbers in the figure of RS-485
communication interface.
Revision History
11