The Ip Object - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

The IP Object

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
9-2
Move into the ip# object by typing ip at any prompt. The ip#
object itself contains parameters and these can be displayed by
typing i at the ip prompt.
In the table below, click on the parameter for which you require
further assistance.
state
en-filter
state
st
enabled
enabled, disabled
Enables or disables IP routing on this router.
If disabled, the Telnet facility is not available and only
local management of the unit via a terminal connected to
the serial port is possible.
routing
routi
enabled
Enable, Disable
Specifies how IP is to operate on the router.
Only change this to disabled if you do not want to route
IP over this router.
routing
cache-timeout
117237-E Rev.00