Bay Networks NauticaRS Reference Manual page 266

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
7-38
nat-enabled
nat-e
no
no, yes
Enables or disables Network Address Translation (NAT)
on this path.
For more information on NAT, refer to Chapter 15.
callback-type
callback-t
None
None, LCP, Caller Specified, Pre-Specified, Either
Normal ISDN Callbacks do not work when you or your
client is using Microsoft Dial Up Networking. To this
end CBCP is used.
Select one of these values:
• LCP: Link Control Protocol (LCP) is selected if
you or the remote router is not Microsoft
compatible. LCP uses RFC 1570, PPP Callback.
• Caller Specified: When we call a remote router,
they supply the number we use to call them back.
Caller Specified uses Callback Control Protocol
(CBCP) as implemented by Microsoft clients and
servers.
• Pre-Specified: If a call back is required, the remote
router calls back on the number specified in the
isdn-number 1/ to 6/
Callback Control Protocol (CBCP) as implemented
by Microsoft clients and servers.
• Either: Either Caller Specified or Pre-Specified is
used as the option here.
parameter. Pre-specified uses
117237-E Rev.00