Bay Networks NauticaRS Reference Manual page 299

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
filt-action
filt-a
dropmismatches
dropmismatches, forward mismatches
Specifies how data is compared against a filter specified
in the Filt-Profile parameter.
There are two values that can be set for this parameter:
DropMismatches: This is the default option. If a filter
profile number has been entered in the previous attribute,
DropMismatches will drop any incoming calls that do
not match the options defined for that filter.
ForwardMismatches: If a call comes through that does
not match the profile of the filter specified in the
previous attribute, then the call will be allowed through.
bootp-relay
bootp
No
No, Yes
Enables BOOTP Relay on this path.
If this path is to be used to send BOOTP Relay
information, enable this option. BOOTP Relay must also
be turned on for the router as a whole in the system#
context.
For more information on BOOTP Relay, refer to
Chapter 1.
Working with Paths
7-71