Bay Networks NauticaRS Reference Manual page 209

Parameter:
MTC:
Default:
Function:
Instructions:
Parameter:
MTC:
Default:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
type
ty
Fixed, cannot be changed by the user
This is the attribute type. For WAN devices, it is set to
WAN and cannot be changed.
This is an information only parameter.
ident
id
Cannot be changed by the user
The name depends on the physical device. It is set by the
system and cannot be changed by the user.
This is an information only parameter.
state
st
enabled
enabled, disabled
The default here is Enabled; set to Disabled and the
Wan is no longer enabled.
Enter a value:
Enabled: Enables the device, allowing it to operate.
Disabled: Disables the device, stopping it from
operating.
Nautica Devices
6-63