Bay Networks NauticaRS Reference Manual page 474

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
18-6
ospf-metric
ospf-m
0
A valid metric or cost
Specifies the cost applied to this path. This number is
system generated, but can be changed manually.
OSPF uses the metric to calculate the best path to a given
area.
ospf-hello-time
ospf-h
10 seconds
A valid number of seconds
The frequency, in seconds, at which OSPF hello packets
are sent to indicate that the unit is available for routing.
Only change this number if you want to change the
frequency of the Hello packets.
ospf-dead-time
ospf-d
40
A valid time in seconds
The period, in seconds, after which a unit is assumed to
be unavailable for routing if an OSPF hello packet has
not been received.
Only change this parameter if you wish to change the
time for a router to respond to hello packets.
117237-E Rev.00