Bay Networks NauticaRS Reference Manual page 108

NauticaRS 5.5R Reference Guide
Enter the network type; 1=EthernetII 2=802.2 3=802.3 (1/2/3):
If SAP filtering is required, enter the names of the valid
remote servers (leave blank for no filtering).
Name of remote server (leave blank for no more):
Do you want to use PPP? (y/n):n
3-12
If you answer n to the autolearn question, you also have to enter
the type of Novell network you are using. Type 1, 2 or 3
depending on the Novell network to which you are attached.
Press enter.
IPX networks can have several servers. Servers control different
network services like printing. If you are using IPX, enter the
name of a server here and press enter. Type another name and
press enter and so on.
When you have entered all the server names, press enter on a
blank line and you will move to the next question.
Caution: Entering server names here restricts Service
Advertisement Protocol (SAP) entries to these servers only. If
you want to receive SAPs from all the local servers, leave this
option blank.
Point to Point Protocol (PPP) is the standard protocol used to
communicate between routers. Unless you know that you need to
use another protocol, like frame relay, for example, leave this at
the default of n.
Otherwise, change this to y and press enter.
Note: If you do not select PPP as the protocol, when Quick
Setup is complete, a path is created using the Nautica protocol.
117237-E Rev.00