NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
9-16
a-port
a-p
0
A valid port number
If the protocol selected is TCP, !TCP, UDP or
!UDP(!=NOT), then a port type may be entered here
against which a further level of matching will be made.
For example, entering 23 here will match for Telnet.
For details of the port numbers that can be entered here,
refer to
Table
9-2.
Enter a port number.
b-ipaddr
b-i
0.0.0.0
A valid IP address
The IP address for the second part of the filter.
Enter an IP address.
b-mlength
b-m
0
A subnet mask
The subnet mask applied to the
Enter a mask length.
b-ipaddr
parameter.
117237-E Rev.00