Modifying Devices - Bay Networks NauticaRS Reference Manual

Modifying Devices

117237-E Rev.00
After you have listed the devices at the box# prompt, it is possible
to edit one of the devices. The following MTC is used when
editing devices:
[co] [mod] dev type/name
where co moves the BCC into config mode (if necessary); mod
modifies the device (optional); dev moves the BCC into the
device object; type is the type of device to be edited and name is
the name assigned to the device.
For example, at the box# (config) prompt, the following is typed
to modify the Basic Rate Interface (BRI) device:
box# dev bri/isdn-ta01
device/bri/isdn-ta01#
As in the previous example, the BCC prompt changes to show
that you are now inside the device object. Typing i (the MTD for
the info command) at a device prompt displays a list of all the
device parameters.
In the table below, click on the device type for which you require
more information.
The Voice Device
PRI Attributes
Device Statistics
Nautica Devices
The BRI Device
The WAN Device
6-7