Bay Networks NauticaRS Reference Manual page 141

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
private-community
pr
PRIVATE
A valid password
Changing this parameter changes the write access to this
router. The parameter must match in both the sending
and receiving routers for the configuration changes to be
made. This password allows SNMP "set" messages to
change the configuration parameters.
Note: The password entered here is case sensitive.
Enter a password if required.
snmp-trap-addr-1 to 4
No MTC
0.0.0.0
Valid IP addresses
The SNMP trap addresses are the IP addresses that
SNMP traps will be sent to. If left at the default 0.0.0.0,
no traps will be sent.
Enter trap addresses if required.
Editing System Settings
5-13