Ipx Routes; Figure 10-1. Listing Ipx Objects - Bay Networks NauticaRS Reference Manual

IPX Routes

117237-E Rev.00
IPX routes can be learned by the unit or entered by the user. To
list existing routes (and other IPX objects), at the ipx# object
prompt, use the ls -l command:
ipx# ls-l
filter/remote
route/S/93812073/central
ripfilter/91208476
sap/S/8023/hoffice/91208472/0000
sapfilter/remote/0451/81208391
ipx#
Figure 10-1.
To edit or create a new IPX route, use the following syntax:
[co] [ipx] [mod|new] route type/net/pname
where co moves the BCC into config mode (if required), ipx takes
you to the ipx# object (if necessary), mod is the modify verb and
new is the new verb (optional), route moves you into the route
object, type specifies the type of IPX route, net is the network
number for this route and pname is the name of the path attached
to this route.
After the route has been created or edited, the BCC moves into
the route object. Typing i at this prompt lists all the route
attributes.
Listing IPX Objects
Using IPX
10-5