Bay Networks NauticaRS Reference Manual page 109

Enter the remote ISDN number to dial:
Enter the password/secret/key (if any):
Quick Setup complete. The Router is now ready for use
[Save] bcc>
box# can 123456
117237-E Rev.00
Type in here the full number of the remote unit you want to call.
This is the ISP number, or the number of the remote unit to which
you want to connect. When Setup completes, it places a call to
this number to learn RIPs, make sure the ISDN line is connected
to the unit.
If you are connecting to the Internet via an ISP, they will give you
a password. Enter this password here.
Alternatively you may need extra security on your router.
Entering a password here will set up the passwords/secrets for
incoming and outgoing PAP and CHAP. If you require more
information on Password Authentication Protocol (PAP) and
Challenge Handshake Authentication Protocol (CHAP), turn to
Chapter 8.
This is the last question in the setup; the prompt will now read:
A call is made to the specified ISDN number at this point to
establish routes. After a minute you can cancel this call using the
verb:
cancel
where is the MTD for the cancel verb (Appendix A) and
can
123456 is the ISDN number to be cancelled.
Configuration Options
3-13