Bay Networks NauticaRS Reference Manual page 100

NauticaRS 5.5R Reference Guide
Are you using Novell IPX? (y/n):n
Do you want to use PPP? (y/n):n
Enter the remote ISDN number to dial:
Enter the password/secret/key (if any):
3-4
For information on how to use Quick Setup to initialize your
router for cul-de-sac routing, refer to
Internet Packet Exchange (IPX) is a protocol used by Novell to
route information across their networks. If you are using a Novell
network you should answer y to this question; otherwise leave it
at the default of n. Press enter.
If you want to use IPX across your router, refer to
Point to Point Protocol (PPP) is the standard protocol used to
communicate between routers. Unless you know that you need to
use another protocol, like Frame Relay, for example, leave this at
the default of n.
Otherwise, change this to y and press ENTER.
Note: If you do not select PPP as the protocol, when Quick
Setup is complete, a path is created using the Nautica protocol.
Type in here the full number (without spaces) of the remote unit
you want to call, including its area code. This is the ISP number,
or the number of the remote unit to which you want to connect.
When setup completes, it places a call to this number to learn
routes; make sure the ISDN line is connected to the unit.
Press enter.
If you are connecting to the Internet via an ISP, they will give you
a password. Type the password here (it is not displayed on the
screen) and press enter.
page 3-6.
page
117237-E Rev.00
3-10.