Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
type
ty
data-in
data-in, data-out, bothway, call
Specifies the type of frame filter this is to be.
Set this value to one of the following:
The filter is only applied to incoming
•
Data-In
:
packets.
•
Data-Out: The filter is only applied to outgoing
packets.
•
Bothway
The filter works on both in and outgoing
:
filters.
•
Call: If a match is made with the packet, an ISDN
call is raised.
enabled
en
no
no, yes
Enables or disables the filtering.
Select this option to enable this filter. Deselect it to
disable the filter.
Bridging and Frame Filters
12-5