Bay Networks NauticaRS Reference Manual page 220

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
6-74
stopbits
sto
1
1, 2
The number of bits sent to mark the end of a frame.
Enter the number of stop bits.
parity
par
none
none, odd, even, mark
This is the error checking option for the modem and
needs to be set according to the modem used.
Note: If you are using PPP, leave the parity option at the default
of none.
The values for this parameter are as follows:
• None: No error checking.
• Odd: Odd error checking only.
• Even: Even error checking only.
• Mark: Set the parity bit to 1.
117237-E Rev.00