Bay Networks NauticaRS Reference Manual page 186

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
Default:
Default:
Options:
Function:
Instructions:
6-40
outgoingres
ou
0
A valid number of channels
Each ISDN port has two channels that can be reserved
for outgoing data calls. Specifying a number here will
reserve that many channels. If the option is left at 0, then
all the channels are used for outgoing data calls as
required.
Caution: The number of incoming and outgoing channels must
not exceed the total channel capacity of the unit (up to 30 per
ISDN connection (Nautica 4000)).
ppp-profile
pp
Either
Either, PAP, CHAP, BWPAP, BWCHAP, BWEither,
None, custom profile
Specifies the default PPP profile that will be used on this
ISDN port for incoming calls. The PPP profile allows for
extra security on the unit.
There are several values that you can set:
• Either: Either incoming PAP or CHAP is accepted
on this port.
• PAP: Only incoming PAP is accepted.
• CHAP: Only incoming CHAP is accepted.
• BWPAP: Incoming and outgoing PAP is accepted.
• BWCHAP: Incoming and outgoing CHAP is
accepted.
• BWEither: Both incoming and outgoing PAP and
CHAP are accepted.
117237-E Rev.00