Bay Networks NauticaRS Reference Manual page 219

Parameter:
Default:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
ppp-profile
ppp-p
either
either, pap, chap, bwpap, bwchap, bweither, none,
custom profile
Specifies the default PPP profile that will be used on this
ISDN port for incoming calls. The PPP profile allows for
extra security on the unit.
There are several values that you can set:
• Either: Either incoming PAP or CHAP is accepted
on this port.
• PAP: Only incoming PAP is accepted.
• CHAP: Only incoming CHAP is accepted.
• BWPAP: Incoming and outgoing PAP is accepted.
• BWCHAP: Incoming and outgoing CHAP is
accepted.
• BWEither: Both incoming and outgoing PAP and
CHAP are accepted.
• None: No profiles are used.
• Custom profile: A profile you have designed
yourself will be used. To design your own PPP
profiles, refer to Chapter 8.
databits
da
8
8, 7
Databits represents the amount of data sent in bits.
Select one of the options.
Nautica Devices
6-73