Bay Networks NauticaRS Reference Manual page 253

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
compression-type
comp
Any
Any, none, staclz, mppc, wcp
A compression type to be used when this path is in use.
Select the type of compression you want to use on this
path. Set the parameter to None if compression is not
supported, or select Any if you are unsure.
• MPPC: Microsoft Point to Point Compression.
• StacLZ: Compression algorithm developed by Stac
Electronics.
• WCP: WAN Compression Protocol as used by
many BayRS routers.
• Any: Any of the above (apart from WCP) will be
negotiated in order of priority: MPPC then StacLZ.
Note: WCP is only used when it is specified by itself. It does
not run with the Any option.
iplearn
ipl
no
no, dhcp
If enabled, this attribute allows the router to
automatically learn the IP address for the path.
If you do not know your IP address, select this
parameter.
Working with Paths
7-25