Bay Networks NauticaRS Reference Manual page 510

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
20-16
type
ty
ipsec
ipsec, eth, frr, nau, ppp
Specifies the protocol used with this path.
To create an IPSec tunnel, leave the path type at the
default of ipsec.
name
na
A path name
A display string used to identify the path
The name of the path entered at the time of creation.
Leave this parameter at the default entered when the path
was created.
enable
ena
yes
yes, no
Enables (allows) or disables the path.
Only set this parameter to no if you want the path
disabled.
117237-E Rev.00