Global Nat Attributes - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

Global NAT Attributes

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
15-2
Move into the NAT context by typing the following at any
configuration prompt:
[co] nat
where co moves the BCC into config mode (if required) and nat
takes you to the nat# object.
Before NAT entries can be configured, you need to be aware of
the global NAT attributes. These attributes are listed by typing i at
the nat# prompt.
In the table below, click on the parameter for which you require
further assistance.
enabled
all-protocols
enabled
en
yes
yes, no
Enables or disables NAT.
Only change this option to disable NAT on the router.
default-addr
Timeout
117237-E Rev.00