NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
6-78
pathtype
patht
nau
nau, ppp, eth, frr
The operating mode of the path over this PVC. The
options here are NAU (Nautica Router), PPP (PPP
Router), ETH (Ethernet Router) and FRR (Frame Relay
- RFC1490).
Note:
There is no existing standard for operating PPP over a
frame relay connection. Interoperability with non-Nautica
routers should be confined to RFC1490 mode only.
Enter a path type.
pname
pn
Automatic
A valid path name
If the default of Automatic is accepted and the path type
is FRR, then an associated path is created in the Paths
list when the PVC configuration is saved. The PVC can
be associated with any existing path by entering the path
name here.
Accept the default of Automatic, or enter the name of an
existing path on which this PVC is to operate.
117237-E Rev.00