Bay Networks NauticaRS Reference Manual page 255

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
ip-rip-direction
ip-
sendandlisten
none, sendonly, listenonly, sendandlisten
The direction RIP uses on this path.
The values here are as follows:
• SendandListen: RIP updates will be sent and
received along this path.
• None: RIP updates will not be sent or received
along this path.
• SendOnly: The unit will only send RIP updates
over this path.
• ListenOnly: RIP updates will only be received over
this path.
rip-support
ri
Rip1compat
Rip1compat, rip1subnet, rip1, rip2
The type of RIP support used on this path.
The values here are as follows:
• Rip1Compat: RIP2 packets are broadcast. This
option is the RIP1 Compatibility option as specified
in RFC 1723 and is most likely to work with older
RIP1 implementations where the new RIP2 features,
like subnet masking, may be useful.
• Rip1: RIP Version 1 packets are broadcast as per
RFC 1508.
• Rip2: RIP Version 2 packets are multicast to
224.0.0.9 as per RFC 1723.
Working with Paths
7-27