NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
5-10
dhcp-enable
dhcp-
No
No, Yes
Enabling Dynamic Host Configuration Protocol (DHCP)
allows the router to act as a DHCP server. The router can
then pass configuration information, such as permanent
and temporary IP addresses, to unconfigured units.
DHCP is explained in more detail in Chapter 1. To
set-up this router as a DHCP server, enable this
parameter and refer to Chapter 13.
Enable this parameter if you want this router to act as a
DHCP server.
bootp-relay-enable
bootp-relay-e
No
No, Yes
Enabling this option allows the router to forward
BOOTP Relay requests to the server specified in the
bootp-relay-server
means you must set up the
For more information on BootP Relay, refer to
Chapter 1.
Enable this parameter if BootP needs to run across this
router.
parameter. Enabling this parameter
bootp-relay-server
parameter.
117237-E Rev.00