Bay Networks NauticaRS Reference Manual page 512

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
20-18
authent-type
auth
hmd5
hmd5, none, hsha1
This parameter denotes the keying algorithm to be used
when creating security associations.
The values here are as follows:
• hmd5: H-MAC MD5 hashing encryption algorithm.
• none: No authentication is used on the path.
• hsha1: H-MAC Sha 1 encryption algorithm.
anti-replay
ant
yes
yes, no
Prevents an IPSec setup being repeated. This stops
external users listening to an IPSec setup and then
replaying the IPSec instructions again.
Leave this parameter at the default value of yes.
idle-timer
idl
15
A time in minutes
If no data is received over the IPSec tunnel for this
amount of time, a terminate request is sent to close the
tunnel.
Enter a value in minutes.
117237-E Rev.00