Nat Statistics - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

NAT Statistics

Type Protocol Path
Static
nat#
15-8
To list all the NAT configured objects, at the nat# prompt use the
following syntax:
[co] nat ls -l
where co moves the BCC into config mode (if required), nat
takes you to the nat# object prompt and ls -l lists all the objects.
For example:
nat# lso -l
entry/wat1/80
nat#
Figure 15-1.
To display the status of all NAT entries, type the following at any
prompt:
sh nat
where sh is the show verb and nat shows NAT statistics.
A screen similar to the following appears:
Ext Port
wat1 80
In the table below, click on the parameter for which you require
further assistance.
Type
Path
Int-IPAddress
Idle
NAT Entry Listing
Int IP AddressInt Port Idle
198.1.1.1
Protocol
Ext-Port
Int-Port
21 0
117237-E Rev.00