Bay Networks NauticaRS Reference Manual page 139

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Function:
Instructions:
117237-E Rev.00
bootp-relay-server
bootp-relay-s
255.255.255.255
A valid IP address
The IP address of the BOOTP Relay server to which
BOOTP requests are sent.
Leaving this parameter at the default means that BOOTP
requests are only forwarded to those paths that have been
set up for BOOTP Relay, rather than to a specific server.
If an IP address is entered here, the BCC routes BOOTP
Relay requests to this address and not along a
pre-defined path.
For more general information on BootP Relay, refer to
Chapter 1. To enable BootP Relay on a specific path,
refer to Chapter 7.
Enter an IP address if BootP is to be routed to a specific
server, or leave this parameter at the default to send
BootP along specific BootP enabled paths.
syscontact
sysc
NoContact
This is an optional Simple Network Management
Protocol (SNMP) information only field. A contact for
the system can be entered here. Do not use spaces in the
user names; instead use an underscore [
Enter a contact name for SNMP if required.
Editing System Settings
].
_
5-11