Bay Networks NauticaRS Reference Manual page 279

Parameter:
MTC:
Default:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
idle-thresh-pc
id
0
The percentage utilization below which a switched call
is classed as idle and a single additional channel is
closed.
The default here is 0, although the figure should be
non-zero if Bandwidth on Demand is used. This
parameter is related to the Dem-Period parameter.
Note: The value entered here should be half that of the
Dem-Thresh-PC value.
min-call-length
min-c
0
A number of seconds from 0 to 600
Changing this option to anything other than 0 sets the
minimum length for a call. For example, if your ISDN
service provider always charges you for the first minute
of every call, set this value to 58.
compression-type
comp
Any
Any, none, staclz, mppc, wcp
A compression type to be used when this path is in use.
Select the type of compression you want to use on this
path. Set the parameter to None if compression is not
supported, or select Any if you are unsure.
Working with Paths
7-51