Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
Min-Bandwidth set in order to avoid call collisions.
Caution:
Only change the Min-Bandwidth parameter from the
default if Bandwidth Mode is set to Permanent.
max-bandwidth
max-b
0
An integer from 0 to 120
Max-Bandwidth prevents the use of all available
switched circuits for extra bandwidth.
An option of 0 means that Max-Bandwidth has no upper
limit.
dem-thresh-pc
dem-t
0
A percentage from 0
Demand Threshold PC is a percentage utilization of the
total bandwidth of the path. The second channel will be
brought up automatically when the first channel is used
this much.
0 disables the facility.
Note:
If this parameter is used in conjunction with
Idle-Thresh-PC, then the value for the Idle-Thresh-PC
parameter should be half of the Dem-Thresh-PC.
Working with Paths
100
to
7-49