Bay Networks NauticaRS Reference Manual page 317

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
en-filter
en-f
no-filtering
no-filtering, reject-on-match, forward-on-match
Used in conjunction with IP filters
parameter allows you to specify how the Nautica router
uses any filter pairs you may have created.
Select one of the following values:
• None: No filtering is applied.
• Reject-On-Match: Allows frame types that do not
match a pre-defined filter into the Nautica router.
Any frames that match the filter are dropped (not
received by the unit).
• Forward-On-Match: Allows frame types that
match a pre-defined filter into the unit. All other
frames are dropped (not received by the unit).
cache-timeout
ca
998
Any valid time in seconds
Sets the limit for routes to be stored in the IP cache
9-23).
If a route is stored in the IP cache, it is removed if it has
not been used for longer than the time specified here.
Note: Any value below 30 seconds may cause excessive
overheads for the unit. 0 is not a valid configuration for this
parameter.
Using IP
(page 9-13), this
(page
9-3