Bay Networks NauticaRS Reference Manual page 522

NauticaRS 5.5R Reference Guide
Verb:
MTC:
Function:
Instructions:
Example:
A-2
batch
bat
Defers configuration changes until the
entered.
Normally when configuration commands are entered,
they are implemented by the router immediately
regardless of wherther or not they have been saved. The
batch verb allows these changes to be made without
them being instantly implemented.
This verb is used in conjunction with the
The following command set shows how batch and
commit can be used to enter a list of configuration
commands. If there are a lot of changes to be made, or if
a configuration script is being pasted into the router,
batch and commit are the easiest way to enter large
amounts of data.
box# bat
BATCH MODE
box# new pa ppp/baycenter
box# isdn-n 1/01234789075
box# ipa 192.168.1.1 ipm 24
box# papi security
box# papo security
box# commit
[Save] path/ppp/baycenter#
commit verb is
commit verb.
117237-E Rev.00