Bay Networks NauticaRS Reference Manual page 534

NauticaRS 5.5R Reference Guide
Verb:
MTC:
Function:
Example:
Verb:
MTC:
Options:
Function:
Example:
A-14
exit
exit
Exit takes you out of the mode you are working in.
To move from config mode to BCC mode:
box# exit
bcc>
To quit the session totally type exit at the bcc> prompt,
or exit exit at the box# prompt:
box# exit exit
goodbye
getsw
getsw
getse <source ip address>
Get Software (getsw) allows a user to load software from
a remote unit.
To load software from a remote unit with an IP address
of 200.200.200.10, for example:
box# getsw 200.200.200.10
Caution: The getsw command uses IP, so an IP path and route
must exist to the destination router. It may be useful to first
the remote unit to ensure it can be reached. The source and
remote units must also be of the same type for example Marlin
to Marlin or Nautica 4000 to Nautica 4000.
ping
117237-E Rev.00