Bay Networks NauticaRS Reference Manual page 513

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
ike-enable
ike
yes
yes, no
Nautica routers support two types of keying, dynamic or
Internet Security Association Key Management Protocol
Internet Keying Exchange (ISAKMP IKE), and static
keying. It is important to check if the remote end of the
tunnel supports IKE or static keying before setting this
parameter.
Select the value the remote IPSec device supports.
local-net
local-n
0.0.0.0
A valid IP address
The IP Address of the private local network.
Enter the IP address of the local network.
remote-net
remote-n
0.0.0.0
A valid IP address
The IP address of the private remote network.
Enter the IP address of the remote network.
Working With IP Security
20-19