Bay Networks NauticaRS Reference Manual page 249

Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
117237-E Rev.00
next-number-mode
next-n
next
next, startattop
The way in which the ISDN numbers are used by the
router.
If a call fails on a number, this parameter specifies how
the next number is called. Next calls the next number
and Startattop calls the number at the top of the list
again.
bandwidthmode
ba
0
Ondemand, Permanent
This specifies the operating and backup mode for the
path. Set this option to OnDemand for switched circuit
and leased circuit only paths.
If a leased circuit path uses switched circuits for extra
bandwidth, this option specifies backup mode. If set to
OnDemand, and a leased circuit fails, a backup call is
made only when data is to be routed over the path.
Permanent specified here means that a backup call will
last as long as the leased-line circuit is down.
min-bandwidth
min-b
0
An integer from 0 to 4294967295
The minimum bandwidth to be allocated to this path. A
value of 0 initially uses the single channel capacity.
Working with Paths
7-21