Bay Networks NauticaRS Reference Manual page 218

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
6-72
speed
sp
9600
A valid speed
The speed, in bits/second, of the interface.
Changing this parameter does not change the actual
device speed, which is determined by the attached DCE
clock rate. This parameter should be altered to allow the
correct device speed to be displayed in all the relevant
status screens.
Note: To operate with the new settings, the device must be
powered off and on after changing the WAN device speed.
ptype
pt
nau
nau, ppp, frr
The type of path to be used on this port.
Select the path type from the following: Nau (Nautica),
PPP (Point to Point), Eth (Ethernet), Frr (Frame Relay).
117237-E Rev.00