Bay Networks NauticaRS Reference Manual page 167

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
tei
tei
127
A valid number from 0 to 127
The Terminal Endpoint Identifier (TEI) must not be
altered unless the ISDN network supplier advises this.
An incorrect setting here may prevent use of the ISDN
line.
A value of 127 allows automatic assignment of the TEI
on startup and this should not be amended.
Only amend this parameter if advised to do so by your
service provider.
Use-CLI
us
Info
Info, Auto, Force
Calling Line Identification (CLI) is a further level of
security that occurs before any other authentication (PAP
and CHAP).
Note: CLI only operates on incoming calls.
When the Nautica 200 receives a call, the calling switch
sends the ISDN number it is calling as part of its data.
This is the CLI number that is matched by this
parameter.
There are three CLI values that you can set, depending
on the level of security required.
Nautica Devices
6-21