Bay Networks NauticaRS Reference Manual page 196

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Instructions:
device/pri/ISDN-PRI01# sh dev st
Type Identification Location
box MARLIN
eth LAN01
wan WAN01 /V.11
isdn ISDN01
exp NX-PRI01
pri ISDN-PRI01
wan WAN02
wan WAN03
Figure 6-2.
6-50
mode
mode
Fractional
Fractional
Setting this option to Fractional will remove the D
channel and allow the ISDN line to work like a leased
line to specific destinations set up by the service
provider at the time of installation.
Note: When you change the mode to Fractional, or back to PRI,
you must reboot the unit before continuing.
A maximum of 31 channels are made available. The
number of channels is dependant on the number of
channels purchased from your service provider.
All ISDN channels are changed to WAN ports when the
Mode is changed to Fractional. To display the new WAN
ports, at any prompt, type the following:
A screen similar to the following appears:
Internal
Internal
Internal-1
Slot 1
Slot 1-1
Slot 1-1-1
Slot 1-1-2
WAN Ports in Fractional PRI Mode
Enabled Status
Enabled Up
Enabled Down
Enabled Disabled
Enabled Up
Enabled Up
Enabled Up
Enabled Down
117237-E Rev.00