Bay Networks NauticaRS Reference Manual page 311

Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
auth-enable
incoming
Incoming, none, bothway
Specifies on which type of calls PAP/CHAP
authentication is to take place.
Select an option:
• Incoming: Authentication is only used on incoming
calls.
• None: No authentication is requested by the unit.
• Bothway: Authentication is used on both incoming
and outgoing calls.
mru
1500 bytes
A value in bytes from 0 to 1580
The largest packet size in bytes.
This is the size of the largest packet, in bytes, that the
Nautica router can receive. This value must match the
value specified by the remote unit.
restart-timeout
1 second
A valid time in seconds from 0 to 4294967
Specifies a time value for the Link Control Protocol
(LCP).
This option works in conjunction with the
parameter. Enter a time value in seconds. The value
represents the number of seconds after which LCP
attempts to re-establish a connection with a remote unit
if a response has been lost.
Using PPP Profiles
echo-timeout
8-9