Bay Networks NauticaRS Reference Manual page 175

Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
Ch2L
ch2l
(Blank)
A valid local directory number
The second local directory number assigned by the
telephone company should be entered here only if ISDN
interface modules with North American ISDN support
are installed. With certain switch configurations, this
parameter need only be set on the first channel.
areacode
area
(Blank)
An area code
The area code associated with the SPIDS and local
numbers.
If necessary, enter your area code.
voice-spid
voi
either
either, ch1, ch2
This parameter is only valid if you are in North America.
when ordering an ISDN line from your supplier, it is
often possible to specify which channels are to be used
for data calls and which for voice.
If you have specified a specific channel for voice calls,
the channel needs to be entered here so the router knows
which channel to use when making a voice call.
Enter the voice channel.
Nautica Devices
6-29