Bay Networks NauticaRS Reference Manual page 172

NauticaRS 5.5R Reference Guide
Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
6-26
mode
bri
bri, leased-ppp, leased-na
This option specifies the type of connection; BRI is the
default. BRI is used for the standard ISDN BRI switched
circuits. If you are using a leased-line ISDN connection
(Type 4), select LEASED-PPP or LEASED-NA.
Leased Line ISDN and Normal Switched ISDN cannot
be used on the same ISDN-TA.
incomingres
0
0, 1, 2
The Nautica 200 has two channels that can be reserved
for incoming data calls. Specifying 1 or 2 here will
reserve the channels. If the option is left at 0, then all the
channels are used for incoming data calls as required.
Note: Reserving both channels for incoming data calls will
mean that the unit can no longer receive voice calls.
117237-E Rev.00