Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
If OSPF is to be used on this router, then change this
parameter to OSPF2. For a description of OSPF refer to
Chapter 1. To set-up OSPF, refer to Chapter 18.
ipx-net-id
ipx-n
00000000
A valid IPX network number
The number of the IPX network.
Enter an IPX network number.
ipx-metric
ipx-m
2
A valid metric
The metric to the next IPX network.
Enter an IPX metric.
ipx-rip-sap-direction
ipx-r
sendandlisten
sendandlisten, none, sendonly, listenonly
The direction RIP and SAP will operate on this path for
IPX calls.
The values here are as follows:
•
SendAndListen: RIP and SAPs are received and
sent along this path.
•
SendOnly: RIP and SAPs are sent along this path
but not received.
Working with Paths
7-55