Bay Networks NauticaRS Reference Manual page 156

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
6-10
connmode
conn
Speech
Speech, Aud31khz
Specifies voice or data only to be received by this port.
The values for this parameter are as follows:
• Speech: If the port is going to be used for voice
only, or you are unsure as to what this port will
receive, then set the value to Speech.
• Aud31Khz: If this voice port is only going to
receive data via a fax or modem, set the connection
mode to Aud31Khz (Audio 3.1 Khz).
resbchan
res
None
None, Either, B1, B2
Each voice device has two B channels; each B channel
can carry a different call (data or voice). You can reserve
one of the two B channels for voice only. This means
that only one data call may be placed, the other B
channel being reserved for the voice port.
The values for this parameter are as follows:
• None: No B channel is reserved.
• B1: Channel B1 is reserved for voice calls.
• B2: Channel B2 is reserved for voice calls.
• Either: Either B channel will be reserved for voice
only, depending on the usage of the channels.
117237-E Rev.00