Bay Networks NauticaRS Reference Manual page 104

NauticaRS 5.5R Reference Guide
Enter the remote ISDN number to dial:
Enter the password/secret/key (if any):
Quick Setup complete. The Router is now ready for use
[Save] bcc>
3-8
Type in here the full number of the remote unit you want to call.
This is the ISP number, or the number of the remote unit to which
you want to connect. When Setup completes, it places a call to
this number to learn routes; make sure the ISDN line is connected
to the unit.
Press enter.
If you are connecting to the Internet via an ISP, they will give you
a password. Enter this password here.
Alternatively you may need extra security on your router.
Entering a password here will set up the passwords/secrets for
incoming and outgoing PAP and CHAP. If you require more
information on Password Authentication Protocol (PAP) and
Challenge Handshake Authentication Protocol (CHAP), turn to
Chapter 8.
This is the last question in the setup; the prompt now reads:
At this point a call is made to the specified ISDN number to
establish routes. After a minute you can cancel this call using the
cancel verb:
box# can 123456
where is the MTD for the cancel verb (Appendix A) and
can
is the ISDN number to be cancelled.
123456
117237-E Rev.00