Bay Networks NauticaRS Reference Manual page 325

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
ipmasklen
ipm
A mask length
A valid subnet mask length
Subnet mask applied to the IP address.
Enter the subnet mask.
pname
pn
A path name
A valid path name (must already exist)
The path on which the network or host can be reached.
The path entered here must be in existence before the
route is created. For more information on paths, refer to
Chapter 7.
Enter a path name.
gateway-addr
ga
0.0.0.0
An IP address
IP address of the next unit to which data is sent for
onward transmission. This option is not required for
non-LAN paths.
Enter a gateway address if required.
Using IP
9-11