Bay Networks NauticaRS Reference Manual page 402

NauticaRS 5.5R Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
12-6
action-on-match
act
reject
reject, forward
If this parameter is set to forward, the packet is
forwarded if a match is made. If no match is made, the
packet is dropped or rejected.
Select forward to forward packets that match the filter or
accept the default to drop the packets.
andnext
an
no
no, yes
If enabled, after this filter has run, the next filter in the
profile group that is enabled runs.
Select Yes to run the next enabled filter in the profile
group, otherwise accept the default.
mask
ma
(Blank)
A valid mask in hexadecimal notation
Allows you to specify exactly which part of the frame
(specified by the offset and length) you want to match.
For example, within the byte shown below, we only want
to match on the first bit (shown in red):
117237-E Rev.00