Bay Networks NauticaRS Reference Manual page 259

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
ipx-advertise
ipx-a
all
all, locallan
To specify which routes and SAPs are to be passed along
this path.
There are two values that can be set here:
• All: This is the default value. With All selected, all
routes and SAPs from all the known networks are
advertised along this path.
• LocalLAN: Selecting LocalLAN only advertises
those routes and SAPs from the local network.
bridging
bridgi
no
no, yes
Allows or disallows bridging on the router.
Only change this parameter to yes if bridging is to be
supported on this router. For more information on
bridging, refer to Chapter 1.
filt-profile
filt-p
0
A user defined number
The profile number of the filter used on this path.
Filters can allow or disallow information into the router.
If filters have been created
number of the filter to be used on this path.
Working with Paths
(page 9-13), assign the profile
7-31