Bay Networks NauticaRS Reference Manual page 313

Parameter:
Default:
Options:
Function:
Instructions:
117237-E Rev.00
The unit receiving the call supplies a BACP callback
number to the unit making the call. This calling unit
dials the callback number to obtain the extra bandwidth.
For more information about BACP callback numbers,
refer to Chapter 1.
Note: If BACP is enabled, MPP must also be enabled, and the
path on which BACP is set must have cnum values.
frag-enable
yes
yes, no
Works with MP
across more than one data channel.
Enable or disable the parameter.
(page 8-10), allowing data to be split
Using PPP Profiles
8-11