Bay Networks NauticaRS Reference Manual page 332

Nortel nautica nauticars software: reference guide

Hide thumbs Also See for NauticaRS:

Table of Contents

NauticaRS 5.5R Reference Guide

!ICMP The exclamation mark here means NOT.

With this option set, information passed between

these IP addresses will only be matched if this

protocol is NOT used.

If ICMP is used as the protocol, the port option is not

supported. Leave port numbers at 0 (off).

TCP (Transmission Control Protocol) With this

option set, information passed between these IP

addresses will only be matched if this protocol is

used. As an example, Telnet uses TCP.

!TCP The exclamation mark here means NOT. With

this option set, information passed between these IP

addresses will only be matched if this protocol is

UDP (User Datagram Protocol) With this option set,

information passed between these IP addresses will

only be accepted if this protocol is used. As an

example, SNMP uses UDP.

!UDP The exclamation mark here means NOT. With

this option set, information passed between these IP

addresses will only be accepted if this protocol is

None Not looking for a match against a specific

117237-E Rev.00

Nauticars 5.5r